Using silicone as a bathroom sealant


How To Apply Bathroom Sealant | Video |
Apply the silicone along the joint

There are various reasons as to why you would need a bathroom sealant in your home. When you find that you need a sealant, it is important that you know what exactly you are doing. Whether you want to seal your basin or bathtub in your bathroom, it is important that you know the proper steps to follow. Silicone is an ideal sealant that you can use for your bathroom. Silicone is an ideal sealant since it stops water from penetrating in cracks in wash basins, shower trays, and bathtubs. Let us have a look at what you need to do when it comes to silicone bathroom sealant.

Preparing the area –

If you already have any old silicone, it is advised that you remove it from the work area. The removal can be done using a utility knife. It is important that you clean the area thoroughly, usually by the use of alcohol.

Load the silicone gun –

Using a knife, create a hole that is small on your silicone gun. This will make it easier to apply the bathroom sealant. Once you have created a hole, load the silicone tube into the gun.

Test the Sealing –

The application of silicon can be tricky if done in the wrong manner. When you press the trigger, the silicon should flow out, and not squirt or drip. Make sure to practice on a test piece, so that you make sure everything is alright. This will give you a fee of the gun and also the rate of the silicon flow.

Apply Sealant to the desired area-

To get the best kind of results, it is important that you hold the gun at an angle of 45 degrees. Apply the sealant in a steady and even manner. Make sure that you do not apply too much, since it’s hard removing excess sealant.

Complete the seal with tooling –

Tooling is a process, whereby you use your finger to create a seamless. A perfect bond between the silicone sealer and sink. To do this, you will be required to gently pull your finger around the silicone/sealant so as to complete the seal. Once done, allow the bathroom sealant to dry off.

If the process of application is done right, the sealant should be okay and will provide you with the necessary function. If you are not aware of how to use sealant, it is essential that you seek help from a professional.